Plastic Pallet Blow Moulding Machine
- Meenchi
- China
- About 40 working days after deposit
- 10 sets per month
What are the inspection work before the operation of special blow molding machine for pallet?
1. Before opening the special blow molding machine for pallet in each shift, smooth oil must be added to each movable part once. (manipulator, manipulator guide rail, opening and closing mold guide rail) before consumption, check whether the moving parts are firm, whether the screws are loose and loose, especially in the center with strong impact force, and whether the belt drive part is abnormal.
2. The mould of special blow molding machine for pallet must be cleaned and polished regularly. When opening the up and down air source switch, it must be slow to prevent the air source from flowing too fast and dirt from blowing into the solenoid valve. At the same time, open the exhaust valve for 30 seconds to ensure the air is clean.
3. Check whether * * is damaged or broken. Change it in time. Check whether the pneumatic components can leak air and whether the action can be flexible. Check whether the triplet can leak abnormally, whether it can be blocked, and whether the water storage capacity of the water cup is too full. If the solenoid valve of special blow molding machine for tray is abnormal, it shall be cleaned in time.
4. You can swing your arms once every three to four days. Heating machine big chain, small chain can be once a month. Always check whether the reducer of the main engine and the reducer of the heater are short of oil. The main engine bearing can be added once every (2-3) months.
PLASTIC PALLET BLOW MOULDING MACHINE
PRODUCT DESCRIPTION:
The drive system of the special blow molding machine for pallet is usually servo electric drive, saving power, energy and stable operation. Here is a detailed summary of the advantages of the drive system of the special blow molding machine for pallets. Friends who want to know about it can learn about it with us.
The servo electric drive system of the special blow molding machine for pallet reduces the electric energy waste caused by the constant opening of the oil pump or compressor when the hydraulic system or pneumatic system is in operation, which is more than 50% energy saving compared with the hydraulic system and pneumatic system. The use of servo electric blow molding machine for tray can also avoid the equipment pollution of leaking bags, and can meet the requirements of food, health and other industries for the sanitation of special blow molding machine for tray.
The tray dimensions are: 0.63* 0.73m 、 1.270 * 0.750m 、1.2 * 1m 、1.4m * 1.6m 、1.1 * 900 、1m * 1m 、 1.1 * 1.2m and etc.
OPERATION PROCESS
1. When the tray blow molding machine stops, which one is the best, the feeding system should be closed first, the hopper blanking baffle should be closed, and the materials in the barrel should be discharged, and the machine should be shut down after the materials are emptied.
2. Then close all auxiliary machines of tray blow molding machine, heater, cooling water pump and lubricating oil pump of each section, cut off the main control power supply, and close all water inlet valves.
PRODUCT PARAMETERS:
| Plastic Pallets blow moulding making machine price | |||||
POWER | Driving motor power | KW | 45 | 75 | 200 |
| Host barrel heating power | KW | 19.2 | 24 | 90 | |
| Oil pump motor power | KW | 30 | 30 | 55 | |
Productivity | Maximum plasticizing | KG/h | 160=200 | 180-230 | 600 |
| Total power | KW | 124.2 | 164.2 | 417 | |
| Accumulator Capacity | L | 12 | 18 | 80 | |
Mold parameters | Clamping force | KN | 550 | 550 | 1500 |
| Steel moulding plate size | MM | 900*1400 | 900*1600 | 1500*1500 | |
| Extrusion die diameter(max) | MM | 450 | 450 | 800 | |
| Screw parameter | Main screv diameter | MM | 100 | 100 | 550 |
| Main screw L/D ratio | -L/D | 25 | 28 | 50 | |
PRODUCT DETAILS:
The working machine
Final production
